committees

Project Committees

Go to PMA ByLaws (pdf 153k)

Awards of Excellence Committee
Purpose: To judge the R. J. Pritchard - Higgins Design and SKD Productivity Awards

Chair
Larry T. Caschette
Metalcraft Industries, Inc.
ltc@metalcraftind.com

Daniel Armock
GR Spring & Stamping, Inc.
armock@grs-s.com

Robert Byrne
American Trim
bbyrne@amtrim.com

Peter Doolittle
Hobson & Motzer, Inc.
pdoolittle@hobsonmotzer.com

Frank Lynster
Zierick Manufacturing Corporation
flynster@zierickhq.com

Peter J. Ulintz
Anchor Manufacturing Group, Inc.
pete.ulintz@anchor-mfg.com


2008 ICOSPA Congress Steering Committee
Purpose: To plan, promote and implement a successful 2008 ICOSPA Congress

Chair
Bruce A Walker
Walker Corporation
bwalker@walkercorp.com

Kent M. Bank
Minneapolis Washer & Stamping, Inc.
kentb@minneapoliswasher.com

Jeffrey S. Clark
Waukesha Tool & Stamping, LLC
jclark@waukeshastamping.com

Robert Earl Clay
Pridgeon & Clay, Inc.
bob@pridgeonandclay.com

Fathi El-Farghali
SEYI Presses
fathi@seyiamerica.com

Jody Fledderman
Batesville Tool & Die
jody.fledderman@btdinc.com

Brian Gillespie
Plexus Systems, Inc.
bgil@plex.com

Timothy Gleason
Olson International Ltd
tim.gleason@olsonintl.com

Ralph Hardt
Feintool Cincinnati, Inc.
rhardt@feintool-usa.com

Dennis Keat
The Su-Dan Corporation
keaden@su-dan.com

Cindy Keat
The Su-Dan Corporation
keatd@aol.com

Nels R. Leutwiler
Parkview Metal Products
nleutwiler@parkv.com

Leo F. Martin
Blow Press
leof.martin@yahoo.com

Michael S. Mehwald
Atlantic Tool & Die Company
mikemehwald@atlantictool.com

Chip Michaelsen
ODM Tool & Manufacturing Co., Inc.
chipm@odmtool.com

Bernard Rosselli
Stewart EFI, LLC
brosselli@stewartefi.com

Patrick J. Thompson
Trans-Matic Manufacturing Co.
pjthompson@transmatic.com

James J. Zawacki
GR Spring & Stamping, Inc.
zawacki@grs-s.com

STAFF:

William E. Gaskin
Precision Metalforming Association
wgaskin@pma.org

Mandy J. Basel
Precision Metalforming Association
mbasel@pma.org


committees

Operational Committees

Go to PMA ByLaws (pdf 153k)

Audit Committee
"The Audit Committee shall consist of not less than five members one of which shall be the First Vice Chairman, and shall be appointed annually by the Chairman with the approval of the Board of Directors. The Chair of the Audit Committee shall perform a financial audit as required by Article X, Section 12. The Audit Committee shall also perform an audit of the Board of Directors and Executive Committee minutes for the prior twenty-four months and report on actions taken and issues outstanding from said minutes."

--PMA ByLaws

Chair
Robert J. McCoy
ART Technologies, Inc.
robb@art-technologies.com

Wayne J. Boeckman
WJB Holdings LP
wjb-ku@sbcglobal.net

William L. Fitzwater
Superior Die Set Corp.
salesvp@supdie.com

Brian Gorris
Stripmatic Products, Inc.
bgorris@stripmatic.com

Lisa Habe
Interlake Stamping of Ohio Inc.
lhabe@interlakestamping.com

STAFF:

William E. Gaskin
Precision Metalforming Association
wgaskin@pma.org

Marcia C. Daniels
Precision Metalforming Association
mdaniels@pma.org


Executive Committee

"The Executive Committee shall consist of seven persons appointed annually by the Chairman of the Board with the approval of the Board of Directors and shall include the Chairman of the Board, the First Vice Chairman, the Second Vice Chairman and Treasurer, the immediate Past Chairman of the Board, two Manufacturing Member Directors and an Associate Member Director. The Executive Committee shall be approved by the Board of Directors at the annual organizational meeting of the board each year."

--PMA ByLaws

Chair
Ralph Hardt
Feintool Cincinnati, Inc.
rhardt@feintool-usa.com

James G. Barrett
Link Systems
jimb@linkelectric.com

Wayne Boeckman
WJB Holdings LP
wjb-ku@sbcglobal.net

William L. Fitzwater
Superior Die Set Corp.
salesvp@supdie.com

Jody Fledderman
Batesville Tool & Die
jody.fledderman@btdinc.com

James B. McGregor
Morgal Machine Tool Company, Inc.
jim.mcgregor@2200llc.com

Wes E. Smith
E & E Manufacturing Co., Inc.
wsmith@eemfg.com

Gretchen A. Zierick
Zierick Manufacturing Corporation
gzierick@zierickhq.com

STAFF:

William E. Gaskin
Precision Metalforming Association
wgaskin@pma.org

Mandy J. Basel
Precision Metalforming Association
mbasel@pma.org


Finance Committee

"The Finance Committee shall consist of nine persons appointed annually by the Chairman of the Board with the approval of the Board of Directors. The Finance Committee shall be chaired by the Second Vice Chair and Treasurer and shall additionally consist of the Chairman of the Board, First Vice Chairman, President, three Manufacturing Member Directors and two Associate Member Directors. It shall prepare an annual budget for submission to the Board of Directors, and advise on investments and the fiscal affairs of the Association as the Board of Directors shall from time to time determine. The Finance Committee shall fix its own rules of procedure."

--PMA ByLaws

Chair
Gretchen A. Zierick
Zierick Manufacturing Corporation
gzierick@zierickhq.com

William J. Adler
Stripmatic Products, Inc.
wjadler@stripmatic.com

James G. Barrett
Link Systems
jimb@linkelectric.com

Wayne Boeckman
WJB Holdings LP
wjb-ku@sbcglobal.net

Robert Earl Clay
Pridgeon & Clay, Inc.
bob@pridgeonandclay.com

William E. Gaskin
Precision Metalforming Association
wgaskin@pma.org

Ralph Hardt
Feintool Cincinnati, Inc.
rhardt@feintool-usa.com

Mark A. Hatch
Wintriss Controls Group of Honeywell
mark.hatch2@honeywell.com

Robert E. Wilson
Sharon Custom Metal Forming
rwilson@scmf.biz

STAFF:

Marcia C. Daniels
Precision Metalforming Association
mdaniels@pma.org


Nominating Committee

"The Nominating Committee shall consist of not less than five (5) Manufacturing members, appointed annually by the Chairman of the Board with the approval of the Board of Directors not later than June 1. No member of the Board of Directors shall serve on the Nominating Committee. The duties of this committee shall be to nominate candidates for Directors to be elected by mail ballot of members, and to formally notify the President of such nominations prior to July 1. The Committee shall nominate one (1) Manufacturing member representative from each properly constituted District, and shall be bound by the choice of each District, as reported by the chair thereof, and shall nominate one member representative from each properly constituted Division and shall be bound by the choice of the members of each Division. The Committee may then nominate Directors-at-large from among Manufacturing member representatives of its own selection in the number necessary to bring the Board complement up to the total number permitted by the bylaws and in accordance with action taken by the Board of Directors. Nominating Committee members are not eligible for nomination."

"The Committee shall notify the President and/or the Secretary in writing not later than July 1, of the names of all nominees for the Board of Directors. The President shall prepare a ballot of nominees for the election of District Directors, Division Directors, At-large Directors and the Immediate Past Chairman Director (if appropriate) and mail it to the last recorded address of each Manufacturing member not later than August 1. The President shall also prepare a ballot of nominees for election of Associate member Directors and mail it to the last recorded address of each Associate member no later than August 1.

The Nominating Committee shall nominate one Manufacturing Member for each of the offices of Chairman, First Vice Chairman, and Second Vice Chairman and Treasurer. Nominated officers shall be members of the Board of Directors at the time of their election as officers.

The written report of nominations of the Nominating Committee for officers shall be filed with the President not later than 15 days prior to the annual meeting for announcement to the Directors at the organizational meeting of the Board of Directors.

Nomination for Directors-at-large may, also, be made if endorsed with the names of not less than ten (10) Manufacturing members of the Association, and if received by the President not later than June 1.

--PMA ByLaws

Chair
Bernard Rosselli
Stewart EFI, LLC
brosselli@stewartefi.com

STAFF:

William E. Gaskin
Precision Metalforming Association
wgaskin@pma.org

Mandy J. Basel
Precision Metalforming Association
mbasel@pma.org


top

Go to Standing Committees  Go to PMA ByLaws (pdf 153k)

PMA Membership Prospecting Form

PMA Calendar A quick look at what, when and where PMA is meeting, teaching and gathering.